Network Login Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1090
show netlogin
show netlogin {port <portlist> vlan <vlan_name>} {dot1x {detail}} {mac}
{web-based}
Description
Shows status information for Network Login.
Syntax Description
Default
N/A.
Usage Guidelines
The information reported by this command is the following:
● Whether network login is enabled or disabled.
● The base-URL.
● The default redirect page.
● The logout privileges setting.
● The netlogin session-refresh setting and time.
● The MAC and IP address of supplicants.
● The type of authentication, 802.1x, MAC-based, or HTTP (web-based).
● The guest VLAN configurations, if applicable.
If you do not specify the authentication type, all will be displayed.
Example
The following command shows the summary network login information:
show netlogin
portlist Specifies one or more ports or slots and ports.
vlan_name Specifies the name of a VLAN.
dot1x Specifies 802.1x information.
mac Specifies MAC-based information.
web-based Specifies web-based information.
detail Shows detailed information.
To Next Page
Loading...