Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
346
disable sharing
disable sharing <port>
Description
Disables a load-sharing group of ports, also known as a link aggregation group (LAG).
Syntax Description
Default
Disabled.
Usage Guidelines
When sharing is disabled, the logical port retains all configuration including VLAN membership. All
other member ports are removed from all VLANs to prevent loops and their configuration is reset to
default values.
Example
The following command disables sharing on master logical port 9 in slot 3, which contains ports 9
through 12, on a modular switch:
disable sharing 3:9
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
port Specifies the logical port of a load-sharing group or link aggregation group
(LAG). Specifies a port or a combination of the slot and port number.
To Next Page
Loading...