disable ripng splithorizon
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1519
disable ripng splithorizon
disable ripng splithorizon {vlan <vlan-name> | tunnel <tunnel_name> | [vlan
| tunnel] all}
Description
Disables the split horizon algorithm for RIPng.
Syntax Description
Default
Enabled.
Usage Guidelines
Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the
router from which the route was learned. Split horizon omits routes learned from a neighbor in updates
sent to that neighbor.
Example
The following command disables the split horizon algorithm for RIPng:
disable rip splithorizon
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vlan-name Specifies an IPv6 configured VLAN.
tunnel-name Specifies an IPv6 tunnel.
all Specifies all interfaces.
To Next Page
Loading...