Extreme Networks ExtremeWare XOS - Configure Cfm Domain Ma-Level

configure cfm domain ma-level
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
433
configure cfm domain ma-level
configure cfm domain <domain_name> ma-level <level>
Description
Changes a previously configured MA level for the specified domain.
Syntax Description
Default
N/A.
Usage Guidelines
You can have up to 8 domains on a switch, and each one must have a unique MA level. Thus, a given
MA level exists only once one a switch.
The IEEE standard 801.2ag specifies different levels for different network users, as follows:
● 0 to 2 for end users
● 3 and 4 for Internet service providers (ISPs)
● 5 to 7 for operators (entities carrying the information for the ISPs)
Example
The following command changes the MA level of a previously created domain extreme to 2:
configure cfm domain extreme ma-level 2
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
domain_name Enter the name of the domain for which you want to change the MA level.
level Specifies the new MA level you are assigning to this domain. Enter a value
between 0 and 7.