Extreme Networks ExtremeWare XOS - Configure Ospf Ase-Summary Add

configure ospf ase-summary add
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1557
configure ospf ase-summary add
configure ospf ase-summary add [<ip-address> <ip-mask> | <ipNetmask>] cost
<cost> {tag <number>}
Description
Aggregates AS-external routes in a specified address range.
Syntax Description
Default
N/A.
Usage Guidelines
This command is only valid on an ASBR.
Example
The following command summarizes AS-external routes:
configure ospf ase-summary add 175.1.0.0/16 cost 10
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ip-address Specifies an IP address.
ip-mask Specifies a subnet mask.
ipNetmask Specifies IP address / Netmask.
cost Specifies a metric that will be given to the summarized route.
tag Specifies an OSPF external route tag.