Extreme Networks ExtremeWare XOS - Show Clear-Flow Acl-Modified

show clear-flow acl-modified
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1105
show clear-flow acl-modified
show clear-flow acl-modified
Description
Displays the ACLs modified by CLEAR-Flow actions.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command displays the ACLs that have been modified by CLEAR-Flow rules that have been
triggered.
Example
The following display shows output for the command show clear-flow acl-modified:
Policy Name Vlan Name Port Rule Name Default ACL CF Added
Actions Actions
================================================================================
clearFlow * 2:26 acl-rule-4 D QP1
clearFlow * 2:26 acl-rule-3 D D
clearFlow * 2:26 acl-rule-2 D M
clearFlow * 2:26 acl-rule-1 P
clearFlow Default * acl-rule-4 D QP1
clearFlow Default * acl-rule-3 D D
clearFlow Default * acl-rule-2 D M
clearFlow Default * acl-rule-1 P
================================================================================
Total Entries: 8
Notation:
P - Permit, D- Deny, M - mirror enabled, m - mirror disabled
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.