show tacacs
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1031
show tacacs
show tacacs
Description
Displays the current TACACS+ configuration and statistics.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The output of this command displays the following information:
● TACACS+—The current state of TACACS+, enabled or disabled.
● TACACS+ Authorization—The current state of TACACS+ authorization, enabled or disabled.
● TACACS+ Accounting—The current state of TACACS+ accounting, enabled or disabled.
● TACACS+ Server Connect Timeout—The amount of time configured to detect and recover from a
TACACS+ server failure.
● Primary TACACS+ Server—Describes information about the primary TACACS+ server, including:
■ The name of the primary TACACS+ server
■ The IP address of the primary TACACS+ server
■ The TCP port to use to contact the primary TACACS+ server
■ The IP address and VR used by the switch
■ The shared secret configured for the primary TACACS+ server
● Secondary TACACS+ Server—Contains the same type of output as the primary TACACS+ server for
the secondary TACACS+ server, if configured.
● TACACS+ Acct Server Connect Timeout—The amount of time configured to detect and recover from
a TACACS+ accounting server failure.
● TACACS+ Accounting Server parameters, if configured. Contains the same type of output as the
TACACS+ server for the TACACS+ accounting server(s), if configured.
Example
The following command displays TACACS+ client configuration and statistics:
show tacacs
To Next Page
Loading...