Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
488
configure lldp snmp-notification-interval
configure lldp snmp-notification-interval <seconds>
Description
Configures the allowed interval at which Simple Network Management Protocol (SNMP) notifications
are sent.
Syntax Description
Default
5 seconds.
Usage Guidelines
This is a global timer. If one port sends a notification, no notifications for other ports go out for the
configured interval.
Example
The following command configures an interval of 60 seconds for LLDP SNMP notifications:
configure lldp snmp-notification-interval 60
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
seconds Specifies the interval at which LLDP SNMP notifications are sent. The range is
5 to 3600 seconds.
To Next Page
Loading...