configure iparp delete
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1333
configure iparp delete
configure iparp delete <ip_addr> {vr <vr_name>}
Description
Deletes an entry from the ARP table. Specify the IP address of the entry.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Removes any IP ARP entry (dynamic or permanent) from the table. The ip_address is used to match
the IP interface address to locate a suitable interface.
Example
The following command deletes an IP address entry from the ARP table:
configure iparp delete 10.1.2.5
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ip_addr Specifies an IP address.
vr_name Specifies a VR name.
To Next Page
Loading...