Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
412
unconfigure ports display string
unconfigure ports <port_list> display-string
Description
Clears the user-defined display string from one or more ports.
Syntax Description
Default
N/A.
Usage Guidelines
This command removes the display string that you configured using the configure ports display-
string
command.
Example
The following command clears the user-defined display string from slot 2, port 4 on a modular switch:
unconfigure ports 2:4 display-string
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
port_list Specifies one or more ports or slots and ports.
To Next Page
Loading...