OSPFv3 Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1640
create ospfv3 area
create ospfv3 {domain <domainName>} area <area-identifier>
Description
Creates an OSPFv3 area.
Syntax Description
Default
Area 0.0.0.0
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates a non-backbone OSPFv3 area:
create ospfv3 area 1.2.3.4
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
domainName Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
area-identifier Specifies an OSPFv3 area, a four-byte, dotted decimal number.
To Next Page
Loading...