EasyManua.ls Logo

Extreme Networks ExtremeWare XOS - Configure Log Target Format

Extreme Networks ExtremeWare XOS
2024 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
configure log target format
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
583
configure log target format
configure log target [console | memory-buffer | nvram | session | syslog
[all | <ipaddress> | <ipPort>] {vr <vr_name>} {local0 ... local7}]]
format [timestamp [seconds | hundredths | none]
| date [dd-mm-yyyy | dd-Mmm-yyyy | mm-dd-yyyy | Mmm-dd | yyyy-mm-dd | none]
| severity
| event-name [component | condition | none | subcomponent]
| host-name
| priority
| process-name
| process-slot
| source-line
Description
Configures the formats of the displayed message, on a per-target basis.
Syntax Description
console Specifies the console display.
memory-buffer Specifies the switch memory buffer.
nvram Specifies the switch NVRAM.
session Specifies the current session (including console display).
syslog Specifies a syslog target.
all Specifies all remote syslog servers.
ipaddress Specifies the syslog IP address.
ipPort Specifies the UDP port number for the syslog target.
vr_name Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of
switches do not support user-created VRs.
local0 ... local7 Specifies the local syslog facility.
timestamp Specifies a timestamp formatted to display seconds, hundredths, or none.
date Specifies a date formatted as specified, or none.
severity Specifies whether to include the severity.
event-name Specifies how detailed the event description will be. Choose from none,
component, subcomponent, or condition.
host-name Specifies whether to include the syslog host name.
priority Specifies whether to include the priority.
process-name Specifies whether to include the internal process name.
process-slot Specifies which slot number the message was generated.
NOTE: This parameter is available only on modular switches.
source-line Specifies whether to include the source file name and line number.

Table of Contents

Related product manuals