Extreme Networks ExtremeWare XOS - Configure Snmpv3 Delete Access

Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
148
configure snmpv3 delete access
configure snmpv3 delete access [all-non-defaults | {[[hex <hex_group_name>]
| <group_name>] {sec-model [snmpv1 | snmpv2c | usm] sec-level [noauth |
authnopriv | priv]}}]
Description
Deletes access rights for a group.
Syntax Description
Default
The default values are:
● sec-model—USM
● sec-level—noauth
Usage Guidelines
Use this command to remove access rights for a group. Use the all-non-defaults keyword to delete
all the security groups, except for the default groups. The default groups are: admin, initial, v1v2c_ro,
v1v2c_rw.
Deleting an access will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {[[hex <hex_group_name>] | <group_name>]} user [all-non-
defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model [snmpv1|snmpv2c|usm]}}]
all-non-defaults Specifies that all non-default (non-permanent) security groups are to be
deleted.
hex_group_name Specifies the group name to be deleted. The value is to be supplies as a colon
separated string of hex octets.
group_name Specifies the group name to be deleted in ASCII format.
sec-model Specifies the security model to use.
snmpv1 Specifies the SNMPv1 security model.
snmpv2c Specifies the SNMPv2c security model.
usm Specifies the SNMPv3 User-based Security Model (USM).
sec-level Specifies the security level for the group.
noauth Specifies no authentication (and implies no privacy) for the security level.
authnopriv Specifies authentication and no privacy for the security level.
priv Specifies authentication and privacy for the security level.