BGP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1716
configure bgp peer-group password
configure bgp peer-group <peer-group-name> password [none | <tcpPassword>]
Description
Configures the TCP MD5 secret password for a peer group and all neighbors of the peer group.
Syntax Description
Default
N/A.
Usage Guidelines
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
● remote-as
● timer
● source-interface
● soft-in-reset
● password
Example
The following command configures the password as Extreme for the peer group outer and its neighbors:
configure bgp peer-group outer password extreme
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
peer-group-name Specifies a peer group.
none Specifies no password.
tcpPassword Specifies a password.
To Next Page
Loading...