EasyManua.ls Logo

Extreme Networks ExtremeWare XOS - Configure Snmpv3 Add Access

Extreme Networks ExtremeWare XOS
2024 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
configure snmpv3 add access
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
129
configure snmpv3 add access
configure snmpv3 add access [[hex <hex_group_name>] | <group_name>] {sec-
model [snmpv1 | snmpv2c | usm]} {sec-level [noauth | authnopriv | priv]}
{read-view [[hex <hex_read_view_name>] | <read_view_name>]} {write-view
[[hex <hex_write_view_name>]] | <write_view_name>]} {notify-view [[hex
<hex_notify_view_name]] | <notify_view_name>]} {volatile}
Description
Creates (and modifies) a group and its access rights.
Syntax Description
Default
The default values are:
sec-model—USM
sec-level—noauth
hex_group_name Specifies the group name to add or modify. The value is to be supplied as a
colon separated string of hex octets.
group_name Specifies the group name to add or modify. The value is to be supplied in
ASCII format.
sec-model Specifies the security model to use.
snmpv1 Specifies the SNMPv1 security model.
snmpv2c Specifies the SNMPv2c security model.
usm Specifies the SNMPv3 User-based Security Model (USM).
sec-level Specifies the security level for the group.
noauth Specifies no authentication (and implies no privacy) for the security level.
authnopriv Specifies authentication and no privacy for the security level.
priv Specifies authentication and privacy for the security level.
read-view Specifies the read view name:
hex_read_view_name—Specifies a hex value supplied as a colon
separated string of hex octets
read_view_name—Specifies an ASCII value
write-view Specifies the write view name:
hex_write_view_name—Specifies a hex value supplied as a colon
separated string of hex octets
write_view_name—Specifies an ASCII value
notify-view Specifies the notify view name:
hex_notify_view_name—Specifies a hex value supplied as a colon
separated string of hex octets
notify_view_name—Specifies an ASCII value
volatile Specifies volatile storage.

Table of Contents

Related product manuals