Extreme Networks ExtremeWare XOS - Eject Memorycard

eject memorycard
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1961
eject memorycard
eject memorycard
Description
Ensures that the external memory card can be safely and manually removed from the external compact
flash slot on the MSM.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
After the switch writes to the external memory card, and before you can view the contents on the card,
you must ensure it is safe to remove the card from the external compact flash slot on the MSM. Use the
eject memorycard command to prepare the card for removal. After you issue the eject memorycard
command, you can manually remove the card from the external compact flash slot on the MSM and
read the data on the card.
If the
configure debug coredumps memorycard command is in effect when you issue the
eject memorycard command, the behavior is similar to issuing the configure debug coredumps off
command.
For more information about removing the external memory card, please refer to the Extreme Networks
Consolidated XOS Hardware Installation Guide.
To access and read the data on the card, use a PC with appropriate hardware such as a compact flash
reader/writer and follow the manufacturer’s instructions to access the compact flash card and read the
data.
Example
The following command prepares the external memory card to be removed from the external compact
flash slot on the MSM:
eject memorycard
History
This command was first available in ExtremeWare XOS 11.1.