show mvr cache
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1853
show mvr cache
show mvr cache {vlan <vlan_name>}
Description
Displays the multicast cache in the MVR range.
Syntax Description
Default
N/A.
Usage Guidelines
If no VLAN is specified, information for all the VLANs is displayed.
Example
The following command displays the multicast cache in the MVR range for the VLAN accounting:
show mvr cache accounting
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
vlan_name Specifies a VLAN name.
To Next Page
Loading...