Extreme Networks ExtremeWare XOS - Create Eaps Shared-Port

create eaps shared-port
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1141
create eaps shared-port
create eaps shared-port <ports>
Description
Creates an EAPS shared port on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
To configure a common link, you must create a shared port on each switch on either end of the common
link.
Example
The following command creates a shared port on the EAPS domain.
create eaps shared-port 1:2
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms with a Core or an Advanced Core license.
ports Specifies the port number of the common link port.