Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
494
disable snmp traps lldp-med
disable snmp traps lldp-med {ports [all | <port_list>]}
Description
Disables the sending of LLDP MED-specific SNMP traps on the specified port or ports.
Syntax Description
Default
Disabled.
Usage Guidelines
If you do not specify any ports, the system stops sending LLDP MED traps from all ports on the switch.
Example
The following example disables sending LLDP MED SNMP traps on all switch ports:
disable snmp traps lldp-med ports all
History
This command was first available in ExtremeWare XOS 11.5.
Platform Availability
This command is available on all platforms.
all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.
To Next Page
Loading...