EAPS Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1140
create eaps
create eaps <name>
Description
Creates an EAPS domain with the specified name.
Syntax Description
Default
N/A.
Usage Guidelines
The name parameter is a character string of up to 32 characters that identifies the EAPS domain to be
created.
If you use the same name across categories (for example, STPD and EAPS names), Extreme Networks
recommends that you specify the identifying keyword as well as the actual name. If you do not use the
keyword, the system may return an error message.
Example
The following command creates EAPS domain eaps_1:
create eaps eaps_1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
name Specifies the name of an EAPS domain to be created. May be up to 32
characters in length.
To Next Page
Loading...