EasyManua.ls Logo

Extreme Networks ExtremeWare XOS - Disable Icmp Redirects

Extreme Networks ExtremeWare XOS
2024 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1360
disable icmp redirects
disable icmp redirects {vlan <name>}
Description
Disables generation of ICMP redirect messages on one or all VLANs.
Syntax Description
Default
Enabled.
Usage Guidelines
Disables the generation of ICMP redirects (Type 5) to hosts who direct routed traffic to the switch where
the switch detects that there is another router in the same subnet with a better route to the destination.
Example
The following command disables ICMP redirects from VLAN accounting:
disable icmp redirects vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
name Specifies a VLAN name.

Table of Contents

Related product manuals