IPv6 Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1452
enable router-discovery
enable router-discovery {ipv6} {vlan <vlan_name>}
Description
Enables router discovery advertisements on the VLAN and the processing of router discovery messages.
Syntax Description
Default
N/A.
Usage Guidelines
This command is only valid when the specified VLAN has an IPv6 address associated with it. After
IPv6 Router Discovery is enabled on a VLAN, router advertisement messages are regularly sent on all
ports associated with the VLAN.
If no VLAN is specified, Router Discovery is enabled on all IPv6 configured VLANs.
Example
The following command enables router discovery for the VLAN top_floor:
enable router-discovery vlan top_floor
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vlan_name Specifies an IPv6 configured VLAN.
To Next Page
Loading...