Extreme Networks ExtremeWare XOS - Configure Cfm Domain Association Delete Intermediate-Point

configure cfm domain association delete intermediate-point
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
427
configure cfm domain association delete intermediate-
point
configure cfm domain <domain_name> association <association_name> ports
<port_list> delete intermediate-point
Description
Deletes a maintenance intermediate point (MIP) from that MA.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete an MIP.
Use the
show cfm command to verify your configuration.
Example
The following command deletes port 5:12 as an MIP on the test association in the brazil domain:
configure cfm domain brazil association test ports 5:12 delete intermediate-point
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
domain_name Enter the domain associated with the MA you are configuring.
association_name Enter the name of the MA for which you are deleting an MIP.
ports Enter the port number you want to delete as an MIP.