Extreme Networks ExtremeWare XOS - Configure Iproute Delete Blackhole Default

configure iproute delete blackhole default
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1345
configure iproute delete blackhole default
configure iproute delete blackhole default {vr <vrname>}
Description
Deletes a default blackhole route from the routing table.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
None.
Example
The following command deletes a blackhole default route from the routing table:
configure iproute delete blackhole default
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vrname Specifies a VR name.