unconfigure sflow
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
713
unconfigure sflow
unconfigure sflow
Description
Resets all the sFlow values to the default values.
Syntax Description
This command has no arguments or variables
Default
The default values for sFlow are as follows:
● sFlow agent IP address—0.0.0.0
● sampling frequency—sample one every 8196 packets
● polling interval—20 seconds
● maximum CPU sample limit—2000 samples per second
sFlow is unconfigured and disabled on all ports.
Usage Guidelines
This command resets sFlow values to the default values, and removes any port configurations, and any
sFlow collectors configured on the switch.
Example
The following command unconfigures sFlow:
unconfigure sflow
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms with an Advanced Edge, a Core, or an Advanced Core
license.
To Next Page
Loading...