Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
712
● severity—on
● event-name—none
● host-name—off
● sequence-number—off
● process-name—off
● process-slot—on (modular switches only)
● process-id—off
● source-line—off
Usage Guidelines
NOTE
The BlackDiamond 8800 series switch and the Summit X450 family of switches do not support user-created VRs.
Use this command to reset the target format to the default format.
Example
The following command sets the log format for the target session (the current session) to the default:
unconfigure log target session format
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...