quit
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
189
quit
quit
Description
Logs out the session of a current user for CLI or Telnet.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this command to log out of a CLI or Telnet session.
When you issue this command, you are asked to save your configuration changes to the current, active
configuration. Enter
y if you want to save your changes. Enter n if you do not want to save your
changes.
Example
The following command logs out the session of a current user for CLI or Telnet:
quit
A message similar to the following is displayed:
Do you wish to save your configuration changes to primary.cfg? (y or n)
Enter y if you want to save your changes. Enter n if you do not want to save your changes.
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...