show tacacs-accounting
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1033
show tacacs-accounting
show tacacs-accounting
Description
Displays the current TACACS+ accounting client configuration and statistics.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The output of this command displays the following information:
● TACACS+ Accounting—The current state of TACACS+ accounting, enabled or disabled.
● TACACS+ Accounting Server Connect Timeout—The amount of time configured to detect and
recover from a TACACS+ server failure.
● Primary TACACS+ Accounting Server—Describes information about the primary TACACS+
accounting server, including:
■ The name of the primary TACACS+ accounting server
■ The IP address of the primary TACACS+ accounting server
■ The TCP port to use to contact the primary TACACS+ accounting server
■ The IP address and VR used by the switch
■ The shared secret configured for the primary TACACS+ accounting server
● Secondary TACACS+ Accounting Server—Contains the same type of output as the primary
TACACS+ accounting server for the secondary TACACS+ accounting server, if configured.
Example
The following command displays TACACS+ accounting client configuration and statistics:
show tacacs-accounting
The following is sample output of this command:
TACACS+ Accounting : enabled
TACACS+ Acct Server Connect Timeout sec: 3
Primary TACACS+ Accounting Server:
Server name :
IP address : 10.201.31.238
Server IP Port: 49
Client address: 10.201.31.85 (VR-Default)
Shared secret : qijxou
Secondary TACACS+ Accounting Server:Not configured
To Next Page
Loading...