Extreme Networks ExtremeWare XOS - Configure Iproute Ipv6 Priority

IPv6 Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1428
configure iproute ipv6 priority
configure iproute ipv6 priority [ripng | blackhole | icmp | static |
ospfv3-intra | ospfv3-inter | ospfv3-as-external | ospfv3-extern1 | ospfv3-
extern2] <priority>
Description
Changes the priority for all routes from a particular route origin.
Syntax Description
Default
Table 31 lists the relative priorities assigned to routes depending upon the learned source of the route.
ripng Specifies RIPng.
icmp Specifies ICMP.
blackhole Specifies the blackhole route.
static Specifies static routes.
ospfv3-intra Specifies OSPFv3 Intra routing.
ospfv3-inter Specifies OSPFv3 Inter routing.
ospfv3-as-external Specifies OSPFv3 as External routing.
ospfv3-extern1 Specifies OSPFv3 External 1 routing.
ospfv3-extern2 Specifies OSPFv3 External 2 routing.
priority Specifies a priority number in the range of 11 to 65534.
Table 31: Relative route priorities
Route Origin Priority
Direct 10
BlackHole 50
Static 1100
ICMP 1200
OSPF3Intra 2200
OSPF3Inter 2300
RIPg 2400
OSPFv3 ASExt 3100
OSPFv3 Extern1 3200
OSPFv3 Extern2 3300