Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1042
unconfigure radius-accounting
unconfigure radius-accounting {mgmt-access | netlogin} {server [primary |
secondary]}
Description
Unconfigures the RADIUS accounting server configuration.
Syntax Description
Default
Unconfigures both the primary and secondary accounting servers for management and network login.
Usage Guidelines
If you do not specify any keywords, this command unconfigures both the primary and secondary
accounting servers for management and network login.
The following list describes the available keywords:
● mgmt-access—Use this keyword to unconfigure only the accounting server(s) for management
functions.
● netlogin—Use this keyword to unconfigure only the accounting server(s) for network login.
● primary—Use this keyword to specify only the primary RADIUS accounting sever.
● secondary—Use this keyword to specify only the secondary RADIUS accounting server.
Example
The following command unconfigures the secondary RADIUS accounting server settings for both
management and network login:
unconfigure radius-accounting server secondary
The following command unconfigures the secondary RADIUS accounting server settings for only
network login:
unconfigure radius-accounting netlogin server secondary
The following command unconfigures all RADIUS accounting server settings for only management
functions:
unconfigure radius-accounting mgmt-access
mgmt-access Specifies the switch management RADIUS accounting server.
netlogin Specifies the network login RADIUS accounting server.
primary Unconfigures the primary RADIUS accounting server.
secondary Unconfigures the secondary RADIUS accounting server.
To Next Page
Loading...