Configuration and Image Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1930
show memorycard
show memorycard
Description
Displays whether an external memory card is present in the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this command to verify if there is an external memory card in the switch.
Example
This command shows whether a memory card is present on the switch:
show memorycard
If you do not have an external memory card installed, the output is similar to the following:
Memorycard is not present.
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available only on modular switches.
To Next Page
Loading...