IPv6 Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1462
unconfigure tunnel
unconfigure tunnel <tunnel_name> ipaddress <ipv6_address_mask>
Description
Unconfigures an IPv6 address/prefix route from a tunnel.
Syntax Description
Default
N/A.
Usage Guidelines
This command will unconfigure an IPv6 address/prefix route from the specified tunnel.
Example
The following command unconfigures the 6in4 tunnel link39 with the address 3aaa::1111/64
unconfigure tunnel link39 3aaa::1111/64
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
tunnel_name Specifies an IPv6 tunnel.
ipv6_address_mask Specifies an IPv6 address / IPv6 prefix length.
To Next Page
Loading...