Extreme Networks ExtremeWare XOS - Show Stpd Ports

STP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1224
show stpd ports
show stpd <stpd_name> ports {[detail | <port_list> {detail}]}
Description
Displays the STP state of a port.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays the following:
● STPD port configuration
● STPD port encapsulation mode
● STPD path cost
● STPD priority
● STPD state (root bridge, and so on)
● Port role (root designated, alternate and so on)
● STPD port state (forwarding, blocking, and so on)
● Configured port link type
● Operational port link type
● Edge port settings (inconsistent behavior, edge safeguard setting)
● MSTP port role (internal or boundary)
To display more detailed information for one or more ports in the specified STPD, including
participating VLANs, specify the
detail option.
If you have MSTP configured and specify the
detail option, this command displays additional
information:
● MSTP internal path cost
● MSTP timers
stpd_name Specifies an STPD name.
port_list Specifies one or more ports or slots and ports.
detail Specifies more detailed information about one or more ports of the STPD.