Extreme Networks ExtremeWare XOS - Configure Iproute Priority

configure iproute priority
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1347
configure iproute priority
configure iproute {ipv4} priority [rip | blackhole | bootp | ebgp | ibgp |
icmp | static | ospf-intra | ospf-inter | ospf-as-external | ospf-extern1 |
ospf-extern2] <priority>
Description
Changes the priority for all routes from a particular route origin.
Syntax Description
Default
Table 26 lists the relative priorities assigned to routes depending upon the learned source of the route.
rip Specifies RIP.
bootp Specifies BOOTP.
ebgp Specifies E-BGP routes
ibgp Specifies I-BGP routes
icmp Specifies ICMP.
blackhole Specifies the blackhole route.
static Specifies static routes.
ospf-intra Specifies OSPFIntra routing.
ospf-inter Specifies OSPFInter routing.
ospf-as-external Specifies OSPF as External routing.
ospf-extern1 Specifies OSPF External 1 routing.
ospf-extern2 Specifies OSPF External 2 routing.
priority Specifies a priority number in the range of 11 to 65534.
Table 26: Relative route priorities
Route Origin Priority
Direct 10
Blackhole 50
Static 1100
ICMP 1200
EBGP 1700
IBGP 1900
OSPFIntra 2200
OSPFInter 2300
RIP 2400
OSPFAsExt 3100
OSPF External 1 3200
OSPF External 2 3300