Extreme Networks ExtremeWare XOS - Enable Esrp

enable esrp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1289
enable esrp
enable esrp <esrpDomain>
Description
Enables ESRP for a named domain.
Syntax Description
Default
Disabled.
Usage Guidelines
Before you enable an ESRP domain, it must have a domain ID. The ESRP domain ID is determined from
one of the following user-configured parameters:
● ESRP domain number created with the configure esrp domain-id command
● 802.1Q tag (VLANid) of the tagged master VLAN
If you do not have a domain ID, you cannot enable ESRP on that domain. A message similar to the
following appears:
ERROR: Cannot enable ESRP Domain "esrp1" ; No domain id configured!
If you add an untagged master VLAN to the ESRP domain, make sure to create an ESRP domain ID
with the
configure esrp domain-id command before you attempt to enable the domain.
Example
The following command enables ESRP for the domain esrp1:
enable esrp esrp1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms with an Advanced Edge, a Core, or an Advanced Core
license.
esrpDomain Specifies the name of an ESRP domain.