Extreme Networks ExtremeWare XOS - Configure Time

Commands for Accessing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
76
configure time
configure time <month> <day> <year> <hour> <min> <sec>
Description
Configures the system date and time.
Syntax Description
Default
N/A.
Usage Guidelines
The format for the system date and time is as follows:
mm dd yyyy hh mm ss
The time uses a 24-hour clock format. You cannot set the year earlier than 2003 or past 2036. You have
the choice of inputting the entire time/date string. If you provide one item at a time and press [Tab], the
screen prompts you for the next item. Press <cr> to complete the input.
Example
The following command configures a system date of February 15, 2002 and a system time of 8:42 AM
and 55 seconds:
configure time 02 15 2002 08 42 55
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
month Specifies the month. The range is 1-12.
day Specifies the day of the month. The range is 1-31.
year Specifies the year in the YYYY format.The range is 2003 to 2036.
hour Specifies the hour of the day. The range is 0 (midnight) to 23 (11 pm).
min Specifies the minute. The range is 0-59.
sec Specifies the second. The range is 0-59.