Extreme Networks ExtremeWare XOS - Unconfigure Ports Aggregate-Bandwidth

unconfigure ports aggregate-bandwidth
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
941
unconfigure ports aggregate-bandwidth
unconfigure ports <port_list> aggregate-bandwidth
Description
Use this command to delete the port-based egress rate limiting parameters; this command returns the
port to 100%, or line rate.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete port-based egress rate limiting on the specified ports. This command
returns the specified ports to run at 100% or line rate.
Example
The following command deletes port-based egress rate limiting from ports 1:1 through 1:5 on your
switch:
unconfigure ports 1:1-5 aggregate-bandwidth
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 12804 R-Series switch.
port_list Specifies the ports from which you want to delete port-based egress rate
limiting.