Extreme Networks ExtremeWare XOS - Clear Iparp

clear iparp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1323
clear iparp
clear iparp {<ip_address> {vr <vr_name>} | vlan <vlan_name>}
Description
Removes dynamic entries in the IP ARP table.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Permanent IP ARP entries are not affected.
This command is specific to a single virtual router, and it applies to the current virtual router if you do
not specify a virtual router.
Example
The following command removes a dynamically created entry from the IPARP table:
clear iparp 10.1.1.5
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ip_address Specifies an IP address.
vlan_name Specifies a VLAN name.
vr_name Specifies a VR name.