show ospf area
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1593
show ospf area
show ospf area {<area-identifier>}
Description
Displays information about OSPF areas.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about OSPF area 1.2.3.4:
show ospf area 1.2.3.4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
area-identifier Specifies an OSPF area.
To Next Page
Loading...