Extreme Networks ExtremeWare XOS - Show Inline-Power Stats Ports

Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
546
show inline-power stats ports
show inline-power stats ports <port_list>
Description
Displays inline power statistics for the specified ports.
Syntax Description
Default
N/A.
Usage Guidelines
The output displays the following inline power statistics for the specified ports:
● State—Displays the port power state:
■ Disabled
■ Searching
■ Delivering
■ Faulted
■ Disconnected
■ Other
■ Denied
● PD’s power class—Displays the class type of the connected PD:
■ “-----”: disabled or searching
■ “class0”: class 0 device
■ “class1”: class 1 device
■ “class2”: class 2 device
■ “class3”: class 3 device
■ “class4”: class 4 device
● Absent—Displays the number of times the port was disconnected.
● InvSig—Displays the number of times the port had an invalid signature.
● Denied—Displays the number of times the port was denied.
● Over-current—Displays the number of times the port entered an overcurrent state.
● Short—Displays the number of times the port entered undercurrent state.
port_list Specifies one or more slots and ports.