enable vlan
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
773
enable vlan
enable vlan <vlan-name>
Description
Use this command to re-enable a VLAN that you previously disabled.
Syntax Description
Default
Enabled.
Usage Guidelines
This command allows you to administratively enable specified VLANs that you previously disabled.
Example
The following command enables the VLAN named accounting:
enable vlan accounting
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
vlan_name Specifies the VLAN you want to disable.
To Next Page
Loading...