Extreme Networks ExtremeWare XOS - Configure Bgp Med

BGP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1684
configure bgp med
configure bgp med [none | <bgp_med>]
Description
Configures the metric to be included in the Multi-Exit-Discriminator (MED) path attribute. The MED
path attribute is included in route updates sent to external peers if a value is configured.
Syntax Description
Default
N/A.
Usage Guidelines
BGP selects routes based on the following precedence (from highest to lowest):
● higher weight
● higher local preference
● shortest length (shortest AS path)
● lowest origin code
● lowest MED
● route from external peer
● lowest cost to Next Hop
● lowest routerID
Example
The following command configures the metric to be included in the MED path attribute:
configure bgp med 3
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
none Specifies not to use a multi-exist-discriminator number.
bgp_med Specifies a multi-exist-discriminator number. The range is 0-2147483647.