Extreme Networks ExtremeWare XOS - Save Debug Tracefiles Memorycard

Troubleshooting Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1974
save debug tracefiles memorycard
save debug tracefiles memorycard
Description
Copies debug information to the external memory card.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
NOTE
Use this command only under the guidance of Extreme Networks Technical Support personnel to troubleshoot the
switch.
Use this command to copy debug information to the specified memory card. The debug information
includes log files and trace files.
Progress messages are displayed that indicate the file being copied and when the copying is finished.
BlackDiamond 10808 Switch Only. In ExtremeWare XOS 11.0, use the
upload debug-info memorycard
command to copy debug information to the external memory card.
Example
The following command copies debug information to the installed external memory card:
save debug tracefiles memorycard
History
This command was first available in ExtremeWare XOS 11.0.
The syntax for this command was modified in ExtremeWare XOS 11.1 from
upload debug-info
memorycard
to save debug tracefiles memorycard.
Platform Availability
This command is available only on modular switches.