show bgp neighbor routes
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1777
show bgp neighbor routes
show bgp neighbor <remoteaddr> {address-family [ipv4-unicast | ipv4-
multicast]} [accepted-routes | received-routes | rejected-routes |
suppressed-routes | transmitted-routes] {detail}
[all
| as-path <path-expression>
| community [no-advertise | no-export | no-export-subconfed
| number <community_num> | <AS_Num>:<Num>
]
| network [any / <netMaskLen> | <networkPrefixFilter>] {exact}
]
Description
Displays information about specified neighbor routes.
Syntax Description
Default
If no address family is specified, IPv4 unicast is the default.
remoteaddr Specifies an IP address that identifies a BGP neighbor.
address-family The address family. BGP supports two address families: IPv4 Unicast and IPv4
Multicast
accepted-routes Specifies that only accepted routes should be displayed.
received-routes Specifies that only received routes should be displayed.
rejected-routes Specifies that only rejected routes should be displayed.
suppressed-routes Specifies that only suppressed routes should be displayed (for route flap
dampening enabled routes).
transmitted-routes Specifies that only transmitted routes should be displayed.
detail Specifies to display the information in detailed format.
all Specifies all routes.
no-advertise Specifies the no-advertise community attribute.
no-export Specifies the no-export community attribute.
no-export-subconfed Specifies the no-export-subconfed community attribute.
community_num Specifies a community number.
AS_Num Specifies an autonomous system ID (0-65535).
Num Specifies the BGP community number.
any Specifies all routes with a given or larger mask length.
netMaskLen Specifies a subnet mask length (number of bits).
networkPrefixFilter Specifies an IP address and netmask.
exact Specifies an exact match with the IP address and subnet mask.
To Next Page
Loading...