Extreme Networks ExtremeWare XOS - Configure Iparp Delete Proxy

IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1334
configure iparp delete proxy
configure iparp delete proxy [[<ipNetmask> | <ip_addr> {<mask>}] {vr
<vr_name>} | all]
Description
Deletes one or all proxy ARP entries.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
When the mask is not specified, the software will assume a host address (that is, a 32-bit mask).
Example
The following command deletes the IP ARP proxy entry 100.101.45.0/24:
configure iparp delete proxy 100.101.45.0/24
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ipNetmask Specifies an IP address/mask length.
ip_addr Specifies an IP address.
mask Specifies a subnet mask.
all Specifies all ARP entries.
vr_name Specifies a VR name.