Extreme Networks ExtremeWare XOS - Configure Ospf Metric-Table

configure ospf metric-table
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1563
configure ospf metric-table
configure ospf metric-table 10M <cost_10m> 100M <cost_100m> 1G <cost_1g>
{10G <cost_10g>}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally,
the 10 Gbps interface.
Syntax Description
Default
● 10 Mbps—The default cost is 10.
● 100 Mbps—The default cost is 5.
● 1 Gbps—The default cost is 4.
● 10 Gbps—The default cost is 2.
Usage Guidelines
None.
Example
The following command configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
cost Specifies the interface cost for the indicated interfaces.