Extreme Networks ExtremeWare XOS - Show Fans

show fans
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
665
show fans
show fans {detail}
Description
Displays the status of the fans in the system.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the fans.
This status information may be useful for your technical support representative if you have a network
problem.
The switch collects and displays the following fan information:
● State—The current state of the fan. Options are:
■ Empty: There is no fan installed.
■ Failed: The fan failed.
■ Operational: The fan is installed and working normally.
● NumFan—The number of fans in the fan tray.
● Fan Name, displayed as Fan-1, Fan-2, and so on (modular switches also include a description of the
location, for example, Upper or Upper-Right)—Specifies the individual state for each fan in a fan
tray and its current speed in revolutions per minute (rpm).
On modular switches, the output also includes the following information:
● PartInfo—Information about the fan tray, including the:
■ Serial number—A collection of numbers and letters, that make up the serial number of the fan.
This is the first series of numbers and letters in the display.
■ Part number—A collection of numbers and letters, that make up the part number of the fan. This
is the second series of numbers and letters in the display.
● Revision—The revision number of the fan.
● Odometer—Specifies the power-on date and how long the fan tray has been operating since it was
first powered-on.
● Temperature—Specifies, in celsius, the current temperature of the fan. (BlackDiamond 10808 switch
only.)
detail The detail option is reserved for future use.