BGP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1664
BGP Communities
A BGP community is a group of BGP destinations that require common handling. ExtremeWare XOS
supports the following well-known BGP community attributes:
● no-export
● no-advertise
● no-export-subconfed
BGP Features
This section lists BGP features supported by ExtremeWare XOS:
● Route Reflectors
● Route Confederations
● Route Aggregation
● Using the Loopback Interface
● BGP Peer Groups
● BGP Route Flap Dampening
● Route Redistribution
● Policy Filtering
● Maximum Prefix Limit
● TCP MD5 Authentication
● EBGP Multihop
● Removal of private AS-Number from AS-path of outbound BGP routes
● Neighbor/Peer Group soft-reconfiguration
● BGP Graceful Restart
NOTE
Although the CLI commands are available, this release of ExtremeWare XOS does not support the MBGP/Route-
refresh features.
To Next Page
Loading...