Extreme Networks ExtremeWare XOS - Disable Radius-Accounting

disable radius-accounting
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
993
disable radius-accounting
disable radius-accounting {mgmt-access | netlogin}
Description
Disables RADIUS accounting.
Syntax Description
Default
RADIUS accounting is disabled for both switch management and network login by default.
Usage Guidelines
Use the mgmt-access keyword to disable RADIUS accounting for switch management functions.
Use the
netlogin keyword to disable RADIUS accounting for network login.
If you do not specify a keyword, RADIUS accounting is disabled on the switch for both management
and network login.
Example
The following command disables RADIUS accounting on the switch for both management and network
login:
disable radius-accounting
The following command disables RADIUS accounting on the switch for network login:
disable radius-accounting netlogin
History
This command was first available in ExtremeWare XOS 10.1.
The
mgmt-access and netlogin keywords were added in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
mgmt-access Specifies the switch management RADIUS accounting server.
netlogin Specifies the network login RADIUS accounting server.