Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
458
configure lldp ports port-description
configure lldp ports [all | <port_list>] [advertise | no-advertise] port-
description
Description
Configures the LLDP port to advertise or not advertise port description information to its neighbors.
Syntax Description
Default
No advertise.
Usage Guidelines
N/A.
Example
The following command configures port 1:7 to not advertise the port description information to
neighbors:
configure lldp ports 1:7 no-advertise port-description
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.
advertise Specifies to send the information to neighbors.
no-advertise Specifies not to send the information to neighbors.
To Next Page
Loading...